● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
Material: tungsten carbide end mill
Grain Size: 0.2um
Category: Micro Square End Mill
No of Flutes: 2F
Coating: Superhard Composite Coating
Material: Carbide
Grain Size:0.2μm
No of Flutes: 2F
Coating: Superhard Composite Coating
Material: Carbide
Grain Size: 0.2μm
Diameter(D): 0.2-0.8mm
No of Flutes: 2F
Category: Micro Corner Radius End Mill
Coating: Superhard Composite Coating
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 2F
Diameter Tolerance: 0-0.006
Coating: Superhard Composite Coating
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 4F
Shank Dia: 4mm,6mm
Categary: Long Neck Square End
Coating: Superhard Composite Coating
Material:Carbide
Grain Size: 0.2μm
No of Flute: 2F
Shank Dia: 4mm,6mm
Coating: Superhard Composite Coating
Material：Carbide
Grain Size: 0.2μm
Category: Corner Radius End Mill
No of Flute: 2F
Coating: Superhard Composite Coating
Carbide: Super micro grain
Grain Size: Grain size is 0.2μm
Flute: 2F
Coating: Superhard Composite Coating
Material: Carbide
Grain Size: 0.2μm
Category: Corner Radius
No of Flutes: 4F
Coating: Superhard Composite Coating
Helix angle：30°
Grain Size: 0.4um
Application: P20、718H etc soft material.NAK80、H13、S136 etc after quenching.
This Small End Mill series of positioning general economical milling cutters. open coarse and fine milling are both applicable.
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 2F
Category: Micro Square End
Coating: DLC
The DLC coated end mills with smaller diameters are used for engraving on the workpiece
Material: Carbide
Grain Size: 0.2um
No of Flutes: 2F
Coating: DLC
Minimize fracturing by high TRS fine(0.2μm) WC grade.
Obtain both tool rigidity & chip evacuation ability
Optimized coating improves wear resistance and improves performance when cutting Even better than Expected. Quality, Trust & Price.
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 2F
Category: Corner Radius End Mill
Coating: DLC
Material: Carbide
Grain size: 0.2μm
No of Flutes: 2F
Category: Long Neck Square End
Coating: DLC
Carbide: Micro grain
Grain Size: Grain size is 0.2μm
Flute: 2F
Coating: DLC
Application: Aluminum Alloy,Red copper, Oxygen-free copper, Aviation Copper,Military parts,copper electrode etc.
Material: Carbide
Grain size: 0.2μm
No of Flutes: 4F
Category: Long Neck Square End Mill
Shank Dia: 4mm,6mm
Coating: DLC
Endmills for copper, copper alloy, nonferrous and nonmetallic materials.
Material : Carbide
Grain size : 0.2μm
Category : Corner Radius
No of Flutes : 4F
Coating : DLC
Material: Carbide
Grain Size: 0.4μm
No of Flutes：2F
Coating: DLC
Copper Electrode Milling Series
Material : Carbide
Grain size: 0.4μm
No of Flutes: 2F
Category: Corner Radius
Coating: DLC
Carbide: Micro grain
Grain Size: Grain size is 0.4μm
Corner R: Corner Radius
Flute: 2F
Coating: DLC
