Micro Grain Carbide 2 Flutes Rib Square End Mills from China Manufacturer

Micro Grain Carbide 2 Flutes Rib Square End Mills US Series

Material:Carbide

Grain size: 0.4μm

Flute: 2F

Coating: AICrTiN

Inquire Now

Category: US＜HRC52 Universal Series

Product Information

PRODUCT DETAILS

Download Specification.pdf

PRODUCT DESCRIPTION ▼

Micro Grain Carbide End Mill

Long reach Rib Processing Carbide endmill are ideal for machining deep or hard-to-reach areas within a workpiece.

carbide end mill 2 flute applicable to high-speed processing of P20, 718H, H13, NAK80, S136, S136H and other materials before heat treatment (＜HRC45) and the processing of various product parts.

Cost-effective at the same time to ensure a good general cutting performance.

【52】2刃深沟平刀.jpg

Model (NO.)	Ball Diameter (D)	Neck Length (L)	Blade Length (L)	Neck Diameter (D)	Neck Angle (γ Reference)	Shank Diameter (D)	Full Length (L)
USE-20010-003-04045	0.1	0.3	0.1	0.085	15°	4	45
USE-20010-005-04045		0.5					45
USE-20010-008-04045		0.8					45
USE-20010-010-04045		1					45
USE-20015-005-04045	0.15	0.5	0.15	0.13	15°	4	45
USE-20015-010-04045	0.15	1	0.15	0.13	15°	4	45
USE-20020-010-04045	0.2	1	0.2	0.18	15°	4	45
USE-20020-015-04045		1.5	0.2	0.18	12°	4	45
USE-20020-020-04045		2					45
USE-20020-030-04045		3					45
USE-20020-040-04045		4					45
USE-20030-010-04045	0.3	1	0.3	0.27	15°	4	45
USE-20030-015-04045		1.5	0.3	0.27	12°	4	45
USE-20030-020-04045		2					45
USE-20030-030-04045		3					45
USE-20030-040-04045		4					45
USE-20030-050-04045		5					45
USE-20040-015-04045	0.4	1.5	0.4	0.37	12°	4	45
USE-20040-020-04045		2					45
USE-20040-030-04045		3					45
USE-20040-040-04045		4					45
USE-20040-050-04045		5					45
USE-20040-060-04045		6					45
USE-20050-020-04045	0.5	2	0.5	0.46	12°	4	45
USE-20050-030-04045		3					45
USE-20050-040-04045		4					45
USE-20050-050-04045		5					45
USE-20050-060-04045		6					45
USE-20050-080-04045		8					45
USE-20050-100-04045		10					45
USE-20060-020-04045	0.6	2	0.6	0.56	12°	4	45
USE-20060-030-04045		3					45
USE-20060-040-04045		4					45
USE-20060-050-04045		5					45
USE-20060-060-04045		6					45
USE-20060-080-04045		8					45
USE-20060-100-04045		10					45
USE-20070-020-04045	0.7	2	0.7	0.66	12°	4	45
USE-20070-030-04045		3					45
USE-20070-020-04045		4					45
USE-20070-050-04045		5					45
USE-20070-060-04045		6					45
USE-20070-080-04045		8					45
USE-20070-100-04045		10					45
USE-20080-020-04045	0.8	2	0.8	0.76	12°	4	45
USE-20080-030-04045		3					45
USE-20080-040-04045		4					45
USE-20080-050-04045		5					45
USE-20080-060-04045		6					45
USE-20080-080-04045		8					45
USE-20080-100-04045		10					45

RELEVANT INFORMATION

PROCESS & FAQ
COMPLETE SERVICE PROCESS ▼

Material Preparation >>

Roughing >>

Finishing >>

Surface Treatment >>

Quality Inspection >>

Laser Marking >>

Packing and Shipping >>

FAQ ▼
- Q: What is the difference between carbide end mills and tungsten carbide milling tools?A: Carbide end mills are made from carbide and cobalt, offering high wear resistance and speed. Tungsten carbide milling tools are specifically made from tungsten carbide, known for extreme hardness and heat resistance.
- Q: How do I choose the right milling tool?A: Consider the material you're machining, the type of milling operation (slotting, contouring, profiling), tool dimensions (diameter, length, shank size), and any specific coatings needed (e.g., TiN, TiAlN).
- Q: What are the benefits of carbide end mills over steel tools?A: Carbide end mills offer higher cutting speeds, longer tool life, better surface finishes, and greater heat resistance compared to high-speed steel tools.
- Q: How can I extend the life of my milling tools?A: 1. Choose the right tool for the job.
  2. Use recommended cutting speeds and feeds.
  3. Apply proper coolant.
  4. Inspect and replace worn tools regularly.
  5. Store tools in a dry, clean environment.
- Q: Are there specific coatings for carbide end mills?A: Yes, coatings like TiN, TiAlN, AlTiN, and DLC can improve wear resistance, reduce friction, and enhance heat resistance.
- Q: Can carbide end mills be re-sharpened?A: Yes, carbide end mills can be re-sharpened, but it's best done by professionals to maintain proper angles and cutting edges.