● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
Your location :
Home
/
Products
/
Micro Diameter End Mill /
ES Copper & Aluminium Series
/
R0.05 to R0.45
Material:Carbide
Grain Size: 0.2um
No of Flutes: 2F
Coating: DLC
Minimize fracturing by high TRS fine(0.2μm) WC grade.
Obtain both tool rigidity & chip evacuation ability
Optimized coating improves wear resistance and improves performance when cutting Even better than Expected. Quality, Trust & Price.
0
PRODUCT DESCRIPTION ▼
Endmills for copper, copper alloy, nonferrous and nonmetallic materials
● Coating material: DLC
● Friction coefficient: 0.05-0.1
● Micro hardness: 7000 HV0.05
● Suitable for copper electrodes finishing
Suitable for a wide range of processing, especially tungsteng copper, aluminum alloys, magnesium alloy, copper alloy and titanium alloys.
The use of low coefficient of friction coating technology, to reduce the viscosity and a good wear resistance.
Drawing :
Model (NO.) | Ball Radius (R) | Blade Length (L) | Blade Diameter (D) | Neck Angle (γ Reference) | Shank Diameter (D) | Full Length (L) |
ESB-20010-04042 | R0.05 | 0.15 | 0.1 | 15° | 4 | 42 |
ESB-20015-04045 | R0.075 | 0.2 | 0.15 | 15° | 4 | 45 |
ESB-20020-04045 | R0.1 | 0.3 | 0.2 | 15° | 4 | 45 |
ESB-20030-04045 | R0.15 | 0.45 | 0.3 | 15° | 4 | 45 |
ESB-20040-04045 | R0.2 | 0.6 | 0.4 | 15° | 4 | 45 |
ESB-20050-04045 | R0.25 | 0.8 | 0.5 | 15° | 4 | 45 |
ESB-20060-04045 | R0.3 | 0.9 | 0.6 | 15° | 4 | 45 |
ESB-20070-04045 | R0.35 | 1.1 | 0.7 | 15° | 4 | 45 |
ESB-20080-04045 | R0.4 | 1.2 | 0.8 | 15° | 4 | 45 |
ESB-20090-04045 | R0.45 | 1.4 | 0.9 | 15° | 4 | 45 |
