0.1mm to 0.9mm
Material: Carbide
Grain Size: 0.2μm
No of Flutes: 2F
Category: Micro Square End
Coating: DLC
The dlc coated end mills with smaller diameters are used for engraving on the workpiece
PRODUCT DESCRIPTION ▼
Applicable to copper and copper alloy and other non-ferrous.
● Coating material: DLC
● Friction coefficient: 0.05-0.1
● Micro hardness: 7000 HV0.05
● Dlc coated end mills suitable for copper electrodes finishing
dlc coated end mills suitable for a wide range of processing, especially tungsteng copper, aluminum alloys, magnesium alloy, copper alloy and titanium alloys.
The use of low coefficient of friction coating technology, to reduce the viscosity and a good wear resistance.
DLC Coated Carbide Micro End Mill Drawing :
Model (NO.) | Blade Diameter (D) | Blade Length (L) | Neck Angle (γ Reference) | Shank Diameter (D) | Full Length (L) |
ESE-20010-04042 | 0.1 | 0.2 | 15° | 4 | 42 |
ESE-20015-04045 | 0.15 | 0.3 | 15° | 4 | 45 |
ESE-20020-04045 | 0.2 | 0.4 | 15° | 4 | 45 |
ESE-20025-04045 | 0.25 | 0.5 | 15° | 4 | 45 |
ESE-20030-04045 | 0.3 | 0.6 | 15° | 4 | 45 |
ESE-20035-04045 | 0.35 | 0.7 | 15° | 4 | 45 |
ESE-20040-04045 | 0.4 | 0.8 | 15° | 4 | 45 |
ESE-20045-04045 | 0.45 | 0.9 | 15° | 4 | 45 |
ESE-20050-04045 | 0.5 | 1 | 15° | 4 | 45 |
ESE-20055-04045 | 0.55 | 1.1 | 15° | 4 | 45 |
ESE-20060-04045 | 0.6 | 1.2 | 15° | 4 | 45 |
ESE-20065-04045 | 0.65 | 1.3 | 15° | 4 | 45 |
ESE-20070-04045 | 0.7 | 1.4 | 15° | 4 | 45 |
ESE-20075-04045 | 0.75 | 1.5 | 15° | 4 | 45 |
ESE-20080-04045 | 0.8 | 1.6 | 15° | 4 | 45 |
ESE-20085-04045 | 0.85 | 1.7 | 15° | 4 | 45 |
ESE-20090-04045 | 0.9 | 1.8 | 15° | 4 | 45 |